SaltDogg SHPE4000 Poly Electric Salt Spreader

Buyers SaltDogg SHPE4000 series spreaders are completely self contained, ultra durable spreader units. The rugged design allows for use with salt or salt/sand mix. The complete assembly mounts easily on dump and platform trucks.
Material hopper - rotationally molded polymer unibody spreader with sides sloped at 45 degree angles to maximize material flow. Features integrated positive position mount system plus 4-piece ratchet tie-down kit. No drilling required.
Auger - screw-type auger system travels the length of the hopper floor, providing maximum material flow at a continuous rate. An independent spinner/auger controller allows for both independent spinner speed and an infinitely adjustable ratio between spinner and auger.
Spinner chute assembly - a 11.5" polymer disc with four fins is connected to a 3/4" diameter shaft. The spreading material is guided from the stainless steel trough to the spinner plate through an enclosed 12-gauge stainless steel chute, with an external deflector. The adjustable deflector allows for a complete directional spread control and full or compact spread. Total spread path ranges from 5’ to 38’. The extra wide deflector protects the rear and under carriage of the vehicle, while a steel guard protects the assembly from accidental damage during operation. A convenient spring-latch locking mechanism allows the spinner assembly to be removed easily for cleaning/storage.
Electric motors - two ultra-quiet 12-volt DC direct drive motors power the auger and spinner, and are protected in a stainless steel housing along with the independently powered vibrator. The wiring harness is constructed of 10-gauge automotive wire with noncombustible sheathing (-50c to -105c). An in-cab console features independent controls for the auger, spinner and vibrator.
Standard equipment - 1/4" black powder coated steel top screen with 1.5" X 1.63" grid pattern. Heavy-duty poly vinyl tarp with reinforced corners and tie-down kit. Heavy duty 12 VDC vibrator, rated at 210 foot pounds for maximum performance. Black powder coated steel permanent mount inverted V.
Material flow/output - salt, 2.2 Cu. Ft. / Minute; salt/sand, 1.3 Cu. Ft. / Minute. Spread width is variable from 5 to 38 feet.


**Alternate Part Number(s):

Part #: SHPE4000

Your Price: $7,099.00

Qty:

Tell a Friend